DE🛒 Inquiry list 0Get a Quote
Home › Resources › Rekeying Kits and Plug Followers

Rekeying Kits and Plug Followers: What Locksmiths Actually Need

Buyer guide · 3 min read · Updated November 2026

Rekeying changes which key opens a lock without replacing the lock: the locksmith takes the plug out, swaps the bottom pins to match a new key and puts it back. It is one of the most common jobs after a house move or a lost key — and the plug follower is the tool that makes it quick.

What is in a rekeying kit

  • Plug follower — pushed in behind the plug as it comes out, so the top pins and springs stay in the cylinder instead of flying out.
  • Pin kit — assorted bottom pins (and sometimes master pins) in a labelled tray.
  • Key gauge or decoder — to read the cut depths of the new key.
  • Tweezers, plug holder and pinning tray — for handling small parts.
  • Plug spinner — if a lock was picked in the wrong direction, the spinner flips the plug the right way without picking again.

Why the follower size matters

A follower has to match the diameter of the plug it replaces. Kwikset and Schlage cylinders — the two names behind most "rekey kit" searches — use similar but not identical plugs, and commercial cylinders vary again. Followers that are too loose let the top pins drop; too tight and they will not slide in.

So stock followers by the cylinders your customers service, not one size for all. Tell us the cylinder brands and sizes you see most and we match followers to them.

What we supply today

Our range covers the follower and spinner side of the job: a black aluminium plug follower, a plug spinner, and a plug spinner packed with a pick set. If you also need pin kits or complete rekeying kits, ask us — we confirm what we can supply with your quote.

Followers are in stock with no minimum order; laser logo marking is available from 100 pcs.

Rekeying vs replacing the lock

Rekeying keeps the existing hardware and only changes the pins, so it is usually faster and cheaper for the end customer than replacing a lock — the reason it is a daily job for residential locksmiths and property managers. Replacement still makes sense when the lock is damaged, worn out or the customer wants a higher-security model.

Lock Plug Spinner
Lock Plug Spinner · No MOQ, in stock

A quick note on master keying

The same tools are used for master keying, where one key opens several locks and each lock also has its own key. It needs extra master pins and careful records, so it is a common upsell for locksmiths who already rekey — and another reason they keep followers in several sizes.

Stocking checklist for distributors

  • Followers matched to the cylinder brands sold in your market.
  • Plug spinners — small, cheap and often forgotten.
  • Pick sets for opening locks without the key before rekeying.
  • Cylinder pullers and disassembly tools for stuck or damaged cylinders.

All of these are in stock with no minimum order.

Plug Spinner with Lock Pick Set
Plug Spinner with Lock Pick Set · No MOQ, in stock

Key terms

PlugThe part of the cylinder that turns with the key.
Bottom pinsThe pins that touch the key; changing them changes which key works.
Top pins and springsThe pins above the plug that the follower holds in place.
Shear lineThe gap between plug and housing where the pins must line up for the lock to turn.
Master pinAn extra small pin that lets a master key and a change key both open a lock.
Plug spinnerA tool that rotates a plug quickly in the other direction.

Questions

What does a plug follower do?

It keeps the top pins and springs in the cylinder while the plug is removed, so the lock can be re-pinned without losing parts.

Do I need different followers for Kwikset and Schlage?

Match the follower to the plug diameter of the cylinders you service. Tell us the brands and we match sizes.

Can you supply full rekeying kits?

We supply plug followers and plug spinners. Ask about pin kits or full kits and we confirm with your quote.

Request a quote

Quote for the tools in this guide.In-stock tools with no minimum, or custom orders from 100 pcs.

Tell us the models, quantities and whether you want your logo. Not sure about a model? Describe the lock or job and we suggest the tools.

  1. Send your listModels, quantities, logo file if you have one.
  2. Get a quote usually within 2 hoursPrice for the whole mix, by email or WhatsApp.
  3. Approve a sampleFree sample (you cover freight) or photo proof of your logo before bulk.

YSZC · Shenzhen, China · since 2019 · enquiries answered by Jack Liu
Email: jack@yslocks.com · WhatsApp: +86 151 1253 1261

Logo file (optional)

We only use your details to answer this enquiry. Forms are delivered by FormSubmit. See our privacy policy.

💬 WhatsAppGet a Quote